Leitz 100 150 P4 blade separator assembly

New item. 3d printed replacement If you are looking for other similar items contact me You will have to reuse your old blades and 4 screws that hold the 2 plastic bits together (they just drop in the plastic) Uncommon tools needed: - Circlip removal tool (that is the one with the red handle) - Stanley knife ( or a different knife with a trapezoidal blade) Assembly tips: - Remove smaller circlip with a stanley knife. Press it in the gap and turn it right. Be careful as the circlip is likely to shoot out - The bolts are fragile. If it is difficult to undo them use WD-40 or similar lubricant and leave it for a few hours - If you are struggling to put the metal guides into the slots use a screwdriver as a lever (shown in picture with the red screwdriver) - Apply fresh grease (not shown)